Working Principle Of Small Ice-making Machine

- Dec 26, 2017 -

Through the inlet valve, the water is automatically entered into a storage tank, then through the pump pumping to the shunt pipe, the shunt pipe will flow evenly to be cooled by cryogenic liquid refrigerant evaporator, the water is cooled to the freezing point, these cool to freezing water will be solidified into ice, and not by the evaporator frozen water into the impoundment trough, Start the cycle again through the pump.

When the ice reached the required thickness, into the ice-removing state, the compressor discharged high-pressure hot gas through the reversing valve drainage to the evaporator, replacing low-temperature liquid refrigerant. This creates a layer of water between the ice and the evaporator, which causes the ice to escape from the evaporator, which is free to fall into the bottom of the ice tank by the action of gravity.

Related News

Related Products

  • 2tons Tube Ice Machine with PLC Controller
  • Full Automatic 10tons Tube Ice Machine
  • Sea Water 15tons Flake Ice Machine
  • Seafood Processing 5tons Plate Ice Machine
  • Large Capacity 20 Tons Ice Cube Machine
  • 3 Tons Automatic Ice Block Machine for Commercial Use