1, in order to ensure safety, do not allow the use of hand direct pressure ice block for cutting.
2, each use finished, must be clean, cleaning should be turned off the main power switch, unplug the plug, and then use a clean towel wipe the water on the machine, after cleaning, remember to put the pressure material cover handle lift.
3, clean when not allowed to use detergent, to prevent residue on the machine on the cleaning agent caused by pollution, also can not wash water directly, lest the electrical components damp, affect the safe use and damage the machine.
4, the motor design of the temporary intercept rate of 80%, to avoid a long continuous operation, after one hour of continuous work, should be suspended for 20 minutes, and then start work, this will greatly extend the life of the motor.
5, whether it is cleaning, maintenance, replacement blades or to clean up the ice residue and other related work, should be turned off the power, unplug the power plug; Do not allow the Captain time no-load operation.